With Blinds4You, measuring for your beautiful new blind is easy. Just follow this step-by-step guide, taking care to double check as you go and look out for some handy tips to help you save time too. Below is a handy guide for measuring for Day & Night blinds
Measuring Guide for Day & Night blinds
This guide works for:
• Standard Roller blinds
• Electric Roller blinds
• Day & Night Roller blinds
If you want your blind to fit inside the window recess.
This is the measurement you need to take if you want your blind to fit inside the window recess. Measure the full width and height of the recess – leave deductions to our experts. You will get a blind ready to fit inside the
• Measure in 3 places for both the width and the drop, use the smallest measurements you’ve taken
• Don’t make any deductions; we will do that for you
• Use a metal tape measure; cloth ones can stretch and give you inaccurate measurement
Handy Tip: Double check the depth of your recess (see recess checking tips opposite) – is it deep enough to take the blind? Are there any obstructions like handles or ventilation
Depth needed for standard Roller blinds = Top-Fix: 50mm, Face-Fix: 70mm
If you want your blind to fit outside the window recess
- Measure the recess as shown opposite before adding your extra height and width to each side. We will make your blind to that exact size with no deductions.
- Looking to keep light to the minimum? We recommend you add at least 50mm on either sides and 70mm to the top.
- At the bottom of the blind be aware of hitting protruding objects like sills or radiators
Handy Tips: Are you replacing an existing blind, like for like? Measure the blind including fittings (see blind measuring tips opposite) and use the Exact fitting option – we will make you one the same size.
The overall width of a Roller blind including brackets is approximately 35mm wider than the fabric width (see Fig 1).
You can choose whether to measure for the full bracket-to bracket width, or for the width you’d like the fabric to cover
Fitting inside a part-tiled recess (also for picture rails, skirting boards)
Measure between the tiles to ensure the blind will fit
Does your window have tiles up the sides of your recess?
These tiles likely reduce the width available compared to a
Measure the width between the tiles for your width.
If the difference is less than 25mm you can use the top measurement. Otherwise use the smaller width from between tiles – remember you will need to top fix or face fix in this instance. Use this method if you have a skirting board, picture rail or something else in the inside of the recess
Bay windows, half-bays & L-shaped windows
These window styles need a more in-depth look to measure for Day & Night blinds. We’ve created measuring guides dedicated to each. Visit www.Blinds4You.co.uk
Angled bay windows
Angled Bay Windows measuring guide available: www.Blinds4You.co.uk/xxxxxxx
N.B. The same guide can be used for angled half-bay windows.
Square bay and L-Shaped windows
Square Bay and L-Shaped Windows measuring guide available: www.Blinds4You.co.uk/xxxxxxx
Once you have noted your measurements, enter the sizes into www.Blinds4You.co.uk/xxxxxxxxx and choose your fitting
option. We will make your new blind to your sizes and send them out to you ready to fit.