This is the measurement you need to take if you want your blind to fit inside the window recess. Measure the full width and height of the recess – leave deductions to our experts. You will get a blind ready to fit inside the recess perfectly.

• Measure in 3 places for both the width and the drop, use the smallest measurements you’ve taken
• Don’t make any deductions; we will do that for you
• Use a metal tape measure; cloth ones can stretch and give
  you inaccurate measurement

Handy Tip: Double check the depth of your recess (see recess checking tips opposite) – is it deep enough to take the blind? Are there any obstructions like handles or ventilation

• • • • • • Measure the recess as shown opposite before adding your extra height and width to each side. We will make your blind to that exact size with no deductions.
          • Looking to keep light to the minimum? We recommend you add
            at least 50mm on either sides and 70mm to the top.
          • At the bottom of the blind be aware of hitting protruding objects like sills or radiators.

Handy Tip: Are you replacing an existing blind, like for like? Measure the blind including fittings (see blind measuring tips opposite) and use the Exact fitting option – we will make you one the same size.

Does your window have tiles up the sides of your recess? These tiles likely reduce the width available compared to a standard recess.

Measure the width between the tiles and use this for your width measurement. Use this method if you have a skirting board, picture rail or something else in the inside of the recess.